Transform unused space into a high-value utility hub.
The VisionHub is a direct-fit replacement for the factory 3rd brake light, engineered for off-roaders who want more capability without adding clutter. Built around OEM mounting points, it delivers a clean, factory-plus look while giving you the lighting and camera options your vehicle never came with.
Lexus GX460 – 2010–2023
(Direct bolt-on. No body modifications required.)
VisionHub housing & Clear lens
Integrated LED 3rd brake light
Stainless steel Light pod mounting hardware
Note: Rear-facing camera and light pods are not included.
The VisionHub turns dead space into a multifunction trail tool:
Rear visibility
Chase lighting
Work/camp lighting
Improved rear camera visibility
Clean, factory-like styling
OEM fitment meets real utility—without adding brackets, clamps, or clutter.
Direct bolt-on using factory mounting points and fasteners
Tight, OEM-style fitment
Low-profile design avoids hatch/tire interference
VisionHub is designed for small, lightweight LED pod lights mounted using existing OEM spoiler mounting points. While VisionHub itself is made from durable ASA plastic, overall mounting strength depends on factory spoiler hardware, accessory weight, vibration, and driving conditions.
For installations using auxiliary lights, VisionHub includes automotive-grade 3M mounting tape to help reduce vibration and share shear loads with the mounting fasteners. The tape is intended as a vibration-damping and load-sharing aid and does not reinforce or replace OEM spoiler hardware.
VisionHub warranty coverage applies to the product itself only and does not extend to vehicle damage. This includes, but is not limited to, damage resulting from failure or loosening of OEM spoiler hardware, improper installation, or use with oversized or heavy accessories.
2010–2023 Lexus GX460
Designed to replace the factory center rear light
Compatible with aftermarket rear cameras (shown with Wolfbox G900 Tri Pro)
Chase light compatibility depends on light size and mounting pattern (shown with Baja Designs S1 LED Auxiliary Light Pod)
For the brake light to function the installer must de-pin the OEM connector and install a replacement connector that comes with your VisionHub. This requires basic hand tools: small pliers and small flathead screwdriver. To be clear, there is no cutting or splicing of the factory wiring, and it can be returned to stock if desired. There is no OEM male plug that exists for the factory LED harness plug which is why this replacement is supplied.
Installs in the factory center rear light location
Secured using the two OEM mounting screws plus included 3M automotive tape
No drilling, cutting, or permanent modification required
This product is a custom, small-batch part and is not an OEM Toyota component
Minor surface variations consistent with high-quality 3D-printed parts may be present
Not guaranteed to meet DOT or SAE requirements for on-road lighting
Does this replace the factory center light?
Yes, VisionHub replaces the factory center rear light.
Is wiring included?
Yes, the LED tail light is pre-wired and comes with an alternate OEM style connector that you must swap over to.
Will this work with my rear camera?
VisionHub uses a single M4 threaded insert and screw to attach cameras. Shown using the Wolfbox G900 Tri Pro, only modification was slightly enlarging a hole on the camera bracket to accept the supplied screw.
Transform unused space into a high-value utility hub.
The VisionHub is a direct-fit replacement for the factory 3rd brake light, engineered for off-roaders who want more capability without adding clutter. Built around OEM mounting points, it delivers a clean, factory-plus look while giving you the lighting and camera options your vehicle never came with.
Lexus GX460 – 2010–2023
(Direct bolt-on. No body modifications required.)
VisionHub housing & Clear lens
Integrated LED 3rd brake light
Stainless steel Light pod mounting hardware
Note: Rear-facing camera and light pods are not included.
The VisionHub turns dead space into a multifunction trail tool:
Rear visibility
Chase lighting
Work/camp lighting
Improved rear camera visibility
Clean, factory-like styling
OEM fitment meets real utility—without adding brackets, clamps, or clutter.
Direct bolt-on using factory mounting points and fasteners
Tight, OEM-style fitment
Low-profile design avoids hatch/tire interference
VisionHub is designed for small, lightweight LED pod lights mounted using existing OEM spoiler mounting points. While VisionHub itself is made from durable ASA plastic, overall mounting strength depends on factory spoiler hardware, accessory weight, vibration, and driving conditions.
For installations using auxiliary lights, VisionHub includes automotive-grade 3M mounting tape to help reduce vibration and share shear loads with the mounting fasteners. The tape is intended as a vibration-damping and load-sharing aid and does not reinforce or replace OEM spoiler hardware.
VisionHub warranty coverage applies to the product itself only and does not extend to vehicle damage. This includes, but is not limited to, damage resulting from failure or loosening of OEM spoiler hardware, improper installation, or use with oversized or heavy accessories.
2010–2023 Lexus GX460
Designed to replace the factory center rear light
Compatible with aftermarket rear cameras (shown with Wolfbox G900 Tri Pro)
Chase light compatibility depends on light size and mounting pattern (shown with Baja Designs S1 LED Auxiliary Light Pod)
For the brake light to function the installer must de-pin the OEM connector and install a replacement connector that comes with your VisionHub. This requires basic hand tools: small pliers and small flathead screwdriver. To be clear, there is no cutting or splicing of the factory wiring, and it can be returned to stock if desired. There is no OEM male plug that exists for the factory LED harness plug which is why this replacement is supplied.
Installs in the factory center rear light location
Secured using the two OEM mounting screws plus included 3M automotive tape
No drilling, cutting, or permanent modification required
This product is a custom, small-batch part and is not an OEM Toyota component
Minor surface variations consistent with high-quality 3D-printed parts may be present
Not guaranteed to meet DOT or SAE requirements for on-road lighting
Does this replace the factory center light?
Yes, VisionHub replaces the factory center rear light.
Is wiring included?
Yes, the LED tail light is pre-wired and comes with an alternate OEM style connector that you must swap over to.
Will this work with my rear camera?
VisionHub uses a single M4 threaded insert and screw to attach cameras. Shown using the Wolfbox G900 Tri Pro, only modification was slightly enlarging a hole on the camera bracket to accept the supplied screw.
