Center Stack Dock - 5th Gen 4Runner

Sale Price: $199.00 Original Price: $229.00
Vehicle Year:
Panel Type:

Introductory pricing ends November 24.

A custom center stack panel for the 5th Gen 4Runner (2014–2024)

The cubby under your climate controls is prime real estate, and Toyota gave it a 12V outlet, a USB port and an empty pocket. The Center Stack Dock turns that space into a clean, factory-looking mount for your trail gear: a ScanGauge 3, a switch panel, a radio, or extra switches. No more dash-top suction mounts or hacked-up trim.

It’s built around a factory fit. The Dock drops in where the stock cubby lives, keeps your factory USB and 12V outlet working, and is designed to go in without drilling or cutting your dash. If you ever want to go back to stock, it comes back out.

Pick your build

  • ScanGauge 3: live engine and transmission data right in your line of sight, mounted flush instead of stuck to the dash.

  • Switch-Pros SP-9100: a factory-looking home for your switch panel.

  • Auxbeam RA-80 8-gang switch panel: the same clean install for Auxbeam setups.

  • Yaesu FTM-510DR control head: your radio controls within easy reach for trail comms.

  • More to come! (Have a suggestion? Message me on Instagram!)

Devices are NOT included.

Every build includes switch blanks, so you can add switches now or later.

Why it’s different

  • OEM+ look: matches the lines of the factory center stack, so it looks like it came from Toyota.

  • Keeps factory features: your stock USB and 12V outlet stay in place and keep working.

  • Reversible: designed to install and remove without permanent changes to your truck.

  • Built for heat: printed in ASA, which holds up to UV and summer cab temperatures better than most plastics.

  • Small-batch: designed, printed and checked by hand in Roseville, CA.

What’s included

  • Complete new lower center stack trim bezel

  • Custom plate to fit your build

  • Switch blanks

  • Install guide

Install

  • Time: Roughly 30 minutes

  • Tools: Long Phillips screwdriver, 10mm wrench.

  • Hardware: Reuse your factory trim hardware

  • Optional tools: trim removal tools (trim can be removed by hand)

Videos

Note: Device and switches are not included. Each build is made to fit the specific device listed, so check your model before ordering.

Introductory pricing ends November 24.

A custom center stack panel for the 5th Gen 4Runner (2014–2024)

The cubby under your climate controls is prime real estate, and Toyota gave it a 12V outlet, a USB port and an empty pocket. The Center Stack Dock turns that space into a clean, factory-looking mount for your trail gear: a ScanGauge 3, a switch panel, a radio, or extra switches. No more dash-top suction mounts or hacked-up trim.

It’s built around a factory fit. The Dock drops in where the stock cubby lives, keeps your factory USB and 12V outlet working, and is designed to go in without drilling or cutting your dash. If you ever want to go back to stock, it comes back out.

Pick your build

  • ScanGauge 3: live engine and transmission data right in your line of sight, mounted flush instead of stuck to the dash.

  • Switch-Pros SP-9100: a factory-looking home for your switch panel.

  • Auxbeam RA-80 8-gang switch panel: the same clean install for Auxbeam setups.

  • Yaesu FTM-510DR control head: your radio controls within easy reach for trail comms.

  • More to come! (Have a suggestion? Message me on Instagram!)

Devices are NOT included.

Every build includes switch blanks, so you can add switches now or later.

Why it’s different

  • OEM+ look: matches the lines of the factory center stack, so it looks like it came from Toyota.

  • Keeps factory features: your stock USB and 12V outlet stay in place and keep working.

  • Reversible: designed to install and remove without permanent changes to your truck.

  • Built for heat: printed in ASA, which holds up to UV and summer cab temperatures better than most plastics.

  • Small-batch: designed, printed and checked by hand in Roseville, CA.

What’s included

  • Complete new lower center stack trim bezel

  • Custom plate to fit your build

  • Switch blanks

  • Install guide

Install

  • Time: Roughly 30 minutes

  • Tools: Long Phillips screwdriver, 10mm wrench.

  • Hardware: Reuse your factory trim hardware

  • Optional tools: trim removal tools (trim can be removed by hand)

Videos

Note: Device and switches are not included. Each build is made to fit the specific device listed, so check your model before ordering.